Figure 19: Configuring the mail server
1. Enter a DNS server (refer to Chapter 10.8 – The Domain Name Service).
2. Now enter the SMTP server (mail server) of the LAN or your provider.
3. Enter the address of the sending Convision V6xx A. This address must be
registered with the provider.
4. Select the authentication method as required by the provider.
5. Enter the user name and password (refer to Chapter 10.6).
9.1.2 ISDN/Modem Connection Data
If the Convision V6xx A is operated via an ISDN connection or a modem, enter the
connection data via this menu item. The Convision V6xx A can be connected either
via ISDN or via an analog modem. It is not possible to operate the two connections at
the same time.
The user can only establish a connection to the Convision V6xx A if both the
user and the Convision V6xx A are using either analog connections or ISDN
connections. Data transmission from an analog modem to ISDN is possible
only over Convision Call.
)
Note: Please check whether you need to enter additional zeroes for your
telephone system.
General
Every time you change or update something in this menu, you will be asked to restart
the Convision video server to save the changes. Click the “Reboot” button to do this.
Setting the IP Address
The IP address preset for devices accessed via ISDN connections is 10.0.0.10. If you
want to access multiple devices via the same ISDN connection and a router, you can
- 36 -
Convision V600 A Series
