PGW40
Operator Manual
4 September 10, 2020 | 296742-ENG R00
1.4 Maintenance Safety Warnings
Only qualified trades-people, i.e. electricians, plumbers, refrigeration mechanics,
etc. should perform installation work as required, according to local codes and
regulations.
DO NOT attempt to install or maintain this equipment without the appropriate
knowledge and expertise.
DO NOT over-tighten the cam locks. The cam locks could be rotated to the point
where they no longer properly engage their receptacles.
Ensure that the drain connections are secure BEFORE operation if the cabinet is
equipped with a separate coil dehumidifier.
Inspect all connections in the machine compartment BEFORE connecting the
equipment to the building utilities.
Conviron recommends waiting at least 10 minutes after powering off the
equipment before servicing the heater elements or related components.
DO NOT service the control panel without using proper ESD procedures, including
the use of a grounding strap and/or anti-static mat.
Use only original replacement parts when maintaining and servicing the
equipment.
Follow all applicable local environmental regulations and guidelines for disposal of
hazardous material. If in doubt, contact local authorities for proper disposal
procedures.
