ConvaTec Esteem +, Manual

Page: 1 / 2

Esteem
®
+
One-Piece Pouch with
ConvaTec Mouldable Technology
™
6. Remove liner 2.
1. In the Box 2. Remove the moldable disk from the pouch.
12. Place the pouch on the body - 2. 10. Remove liner 4. 9. Make place for the stoma. 11. Place the pouch on the body - 1.
4. Molding.
4. Check the size of the molding.
3. Remove liner 1.
7. Place the disk on the body. 8. Remove liner 3.
4
Mouldable disc & pouch come
attached.
4
Remove mouldable disc from the
pouch.
6. Remove liner 2.
1. In the Box 2. Remove the moldable disk from the pouch.
12. Place the pouch on the body - 2. 10. Remove liner 4. 9. Make place for the stoma. 11. Place the pouch on the body - 1.
4. Molding.
4. Check the size of the molding.
3. Remove liner 1.
7. Place the disk on the body. 8. Remove liner 3.
4
Remove liner marked #1. This is
the moulding side.
6. Remove liner 2.
1. In the Box 2. Remove the moldable disk from the pouch.
12. Place the pouch on the body - 2. 10. Remove liner 4. 9. Make place for the stoma. 11. Place the pouch on the body - 1.
4. Molding.
4. Check the size of the molding.
3. Remove liner 1.
7. Place the disk on the body. 8. Remove liner 3.
4
Roll and mould the disc to the size of the
stoma.
Do not stretch, pull or cut.
Pinch
into place once desired size is reached.
6. Remove liner 2.
1. In the Box 2. Remove the moldable disk from the pouch.
12. Place the pouch on the body - 2. 10. Remove liner 4. 9. Make place for the stoma. 11. Place the pouch on the body - 1.
4. Molding.
4. Check the size of the molding.
3. Remove liner 1.
7. Place the disk on the body. 8. Remove liner 3.
4
Check the size of the moulding.
6. Remove liner 2.
1. In the Box 2. Remove the moldable disk from the pouch.
12. Place the pouch on the body - 2.
10. Remove liner 4. 9. Make place for the stoma. 11. Place the pouch on the body - 1.
4. Molding.
4. Check the size of the molding.
3. Remove liner 1.
7. Place the disk on the body. 8. Remove liner 3.
4
Remove liner marked #2.
This side will go on the skin.
6. Remove liner 2.
1. In the Box 2. Remove the moldable disk from the pouch.
12. Place the pouch on the body - 2. 10. Remove liner 4. 9. Make place for the stoma. 11. Place the pouch on the body - 1.
4. Molding.
4. Check the size of the molding.
3. Remove liner 1.
7. Place the disk on the body. 8. Remove liner 3.
4
Place the disk on the body. Push the roll
of adhesive toward the stoma to ensure
a close fit. Skin should be clean and dry.
6. Remove liner 2.
1. In the Box 2. Remove the moldable disk from the pouch.
12. Place the pouch on the body - 2. 10. Remove liner 4.
9. Make place for the stoma.
11. Place the pouch on the body - 1.
4. Molding.
4. Check the size of the molding.
3. Remove liner 1.
7. Place the disk on the body. 8. Remove liner 3.
4
Remove liner marked #3.
6. Remove liner 2.
1. In the Box 2. Remove the moldable disk from the pouch.
12. Place the pouch on the body - 2.
10. Remove liner 4. 9. Make place for the stoma. 11. Place the pouch on the body - 1.
4. Molding.
4. Check the size of the molding.
3. Remove liner 1.
7. Place the disk on the body. 8. Remove liner 3.
4
Separate the sides of the
pouch to allow some air to
enter the pouch.
Mouldable Disc application
1
6. Remove liner 2.
1. In the Box 2. Remove the moldable disk from the pouch.
12. Place the pouch on the body - 2. 10. Remove liner 4. 9. Make place for the stoma. 11. Place the pouch on the body - 1.
4. Molding.
4. Check the size of the molding.
3. Remove liner 1.
7. Place the disk on the body. 8. Remove liner 3.
4
Place pouch on the mouldable disc
6. Remove liner 2.
1. In the Box 2. Remove the moldable disk from the pouch.
12. Place the pouch on the body - 2. 10. Remove liner 4. 9. Make place for the stoma. 11. Place the pouch on the body - 1.
4. Molding.
4. Check the size of the molding.
3. Remove liner 1.
7. Place the disk on the body. 8. Remove liner 3.
4
Smooth/hold skin barrier in place
for about 30 seconds.
6. Remove liner 2.
1. In the Box 2. Remove the moldable disk from the pouch.
12. Place the pouch on the body - 2. 10. Remove liner 4. 9. Make place for the stoma. 11. Place the pouch on the body - 1.
4. Molding.
4. Check the size of the molding.
3. Remove liner 1.
7. Place the disk on the body. 8. Remove liner 3.
4
Remove pouch release liner.
Applying pouch to the Mouldable Disc
2
Refer to package insert for complete instructions.