11
Connecting the water sensor
To connect the water sensor to the WA-700, do the following:
Wate
rA
lar
m
Plug water sensor
connector here
1
Water Sensor
Note:
You can lengthen the cable of the water sensor to 100ft
(30.8m)
, using the equivalent
size wire.
(24 gauge, 2 conductor wire)
Figure 5: Water Sensor Connected to WA-700
Connecting to the standard phone line
To connect the WA-700 to a phone line, do the following:
Wate
rAla
rm
Plug phone cord
connector end here
Wall
Phone Jack
Plug phone cord
connector end here
2
1
Figure 6: WA-700 Connected to Phone Line
Connecting the WA-700 and another device to the same phone
jack
If you need to connect the WA-700 and some other device, such as a telephone, to the same
wall phone jack, simply use a phone jack splitter
(not provided).
To use a splitter, do the
following:
Step
Action
1.
Plug the line splitter into the wall jack as shown in Figure 7.
2.
Plug one phone card into one jack on the line splitter, as shown in Figure 7.
3.
Plug the second phone card into the other jack on the line splitter.
4.
Plug the other end of the one phone cord into the WA-700.
5.
Plug the other end of the remaining phone cord into the phone or other device.
