Contrec 515, Operation Manual

Page: 54 / 92

Instrument Calibration
46 515 HC04 - 8 June 2007
WEEK LOGS
Set the number of Weekly Logs to appear on the printed log report.
The weekly log entry occurs at 00 hours and 00 minutes each Monday.
MONTH LOGS
Set the number of Monthly Logs to appear on the printed log report.
The monthly log entry occurs at 00 hours and 00 minutes on the first day
of the month.
YEAR LOGS
Set the number of Yearly Logs to appear on the printed log report.
The yearly log entry occurs at 00 hours and 00 minutes on the first day of
the year.
RESET LOGS
Reset the logged data. You may need to reset (clear) the logged data if
you change the time/log settings.
Press or to select YES, then press the key. The instrument
makes three beeps to confirm the reset command.
REPORT TYPE
The Printer Protocol Report Type determines the nature of the printout
from the REPORT PRINT - HOLD.SET prompt in the main menu. The
following report types available in this instrument are:
•
REP-01 Hourly Logs Report
•
REP-02 Daily Logs Report
•
REP-03 Weekly Logs Report
•
REP-04 Monthly Logs Report
•
REP-05 Yearly Logs Report
•
REP-06 Previous Day’s 24 Hour Report (0Hr – 23Hr, minimum
48 hourly logs required)
Press or to select Report Type.
PRN TYPE
The Printer Protocol Printer Type allows the nature of the printer being
used to be specified. The following printer types available in this
instrument are:
•
PRN-01 Generic computer printer
•
PRN-02 Generic roll printer (prints first line first)
•
PRN-03 Slip printer TM295
Press or to select Printer Type.
PRINT ACCUM
Select whether the accumulated totals are printed in addition to the non-
accumulated totals for printer protocol.
↓ →
UNITS PARAMS INPUTS OUTPUTS ALARMS COMMS
TM/LOG
SETUP TEST END
SET
SET