Contrec 515 FA01, Operation Manual

Page: 59 / 98

Instrument Calibration
515 FA01 - 29 August 2021 49
Note: If there is an interruption to the power supply and the battery has
failed, the instrument displays an error message when the power
supply is restored. In this case, you should set the current time and
date so that the instrument continues to log data at the correct times.
Data Logging
The instrument will log the main-menu variables if real-time clock option is
installed. The logs are at fixed intervals of hours, days, weeks, months and
years. The instrument can store a total of 1530 log entries which are
distributed over the log intervals as follows:
•
800 hourly logs
•
400 daily logs
•
200 weekly logs
•
100 monthly logs
•
30 yearly logs
If the number of log entries exceeds the programmed number for a particular
time interval, the oldest log entry is overwritten by the newest one for that
time interval.
Also note that the totals are saved as accumulated totals.
The log parameters (below) also determine the number of records to be
included in a report printout if the printing option is used.
 
UNITS PARAMS INPUTS OUTPUTS ALARMS COMMS
TM/LOG
SETUP TEST END
DATE FORM Clock Date Format
The European date format is: dd/mm/yyyy or (Day-Month).
The American date format is: mm/dd/yyyy or (Month-Day).
Press or to select DAY-M or M-DAY
CLOCK YEAR The Clock Year defines the current year for the real-time clock.
CLOCK M-DAY The Clock M-DAY setting defines the current month and date for the
real-time clock. This parameter is programmed in Month-Day format for
both European and American date formats.
CLOCK H-MIN The Clock H-MIN setting is the current time in hours and minutes for the
real-time clock.
HOUR LOGS Set the number of Hourly Logs to appear on the printed log report.
The hourly log entry occurs at 00 minutes each hour.
SET