Contrec 515 FA01, Operation Manual

Page: 36 / 98

Operation
26 515 FA01 - 29 August 2021
To switch between the Detail and Basic menu, while in the main menu,
press and hold the
and keys together for 5 seconds. When
switching to the Detail menu the display will briefly show:
display
DETAIL MENU
.
When switching to the Basic menu the display will briefly show:
display
BASIC MENU
.
When the application software is first installed, the default is the Detail
menu. From that point, the menu type is saved and restored on power cycle.
The menu type will need to be Detail to access the
CAL MENU
Peak Flowrates
The peak value for the currently displayed flowrate can be viewed by
holding the
key. The peak value is the average over a 15 minute
period since the last reset of totals or powering on of the instrument. Dashes
are shown for this value after a reset or power on until the first averaging
period has passed.
Data Logs
The instrument will log the main-menu variables if real-time clock option is
installed. The logs are at fixed intervals of hours, days, weeks, months and
years. The instrument can store a total of more than 1000 log entries.
If the number of log entries exceeds the programmed number for a particular
time interval, the oldest log entry is overwritten by the newest one for that
time interval.
Also note that the totals are saved as accumulated totals.
The log entries are recorded at the following times:
View Data Logs
Use the following procedure to view the data that has been logged by the
instrument:
1. Press the key to scroll through the menu to the
LOGGED DATA
prompt.
DISPLAY SET
ACCUM
HOUR 00 minutes each hour
DAY 00 hours and 00 minutes each day
WEEK 00 hours and 00 minutes each Monday
MONTH 00 hours and 00 minutes on the first day of the month
YEAR
00 hours and 00 minutes on the first day of the year.
DISPLAY