User Manual
No. 0840342
1) Transmission indicator light:
Verifi es a legal button is being pressed, and RF signal is being sent.
2) Position buttons:
Press shortly and the bed will automatically move to the selected position; at fi rst the head section
moves, then the foot section. To stop the automatic movement, press any key shortly.
3) Head & foot up/down buttons:
Press and hold to adjust the head & foot section of the bed to the desired positions.
4) SET button:
Once the desired position of head, foot, vibrators and wave have been made, press the SET button
shortly, release and then press POS1, POS2, POS3 or FAVORITE POSITION button shortly to set the
position.
5) Flat Button:
To level the bed to the sleeping position, press the FLAT button shortly. This also turns off the
vibrators. To stop the automatic movement, press any key shortly.
6) Favorite position button:
To recall the bed’s saved position, press the FAVORITE POSITION button shortly. The bed will
automatically move to the saved position. At fi rst the head section moves, then the foot section.
To stop the automatic movement, press any key shortly.
7) Head & foot massage (vibrator) buttons:
Slowly increases or decreases the intensity of each vibrator for as long as the appropriate button is
pressed.
8) Massage (vibrator) ON – OFF buttons:
Turns on or off the corresponding vibrator. When turned on, the vibrator has an automatic shut off
timer of 30 minutes.
9) Wave ON –OFF button:
Toggle between wave and continuous mode for the vibrators if they are turned on. If they are
turned off, the vibrators turn on in the mode they were in previously.
10) Wave up/down buttons:
Once one or both vibrators are activated and the wave feature is selected, these buttons increase
or decrease the speed of the wave.
Continued on back.
