Continental Refrigerator XT 1.0, Original Instructions Manual

Page: 13 / 16

13 Contononta netin Synne DI PLAY
5.2.6 nnntog nhn atghntog eCdn
NOTE:
The lighting symbols shown here are from
software version 48.2.2.
» Press the /
/ button several times
if necessary to switch from manual to auto-
matic lighting mode or switch the lights on or
off in manual lighting mode (
see document
REMOTE).
The symbol on the display indicates the active
lighting mode.
Symbol Lighting mode
Automatic lighting mode: Lighting
activated
The lighting was activated auto-
matically. The lighting turns off
automatically as the intensity of
the ambient light increases.
Automatic lighting mode: Lighting
deactivated
The lighting was deactivated auto-
matically. The lighting turns on
automatically as the intensity of
the ambient light decreases.
Manual lighting mode: Light on
Manual lighting mode: Light off
6 Cleaning and Maintenance
6.1 antotog
ATTENTION!
Risk of damage!
Improper cleaning can cause material damage.
»
Remove the battery before cleaning your
eBike. Never use liquids to clean the battery.
» Do not clean the CeBS components with a
high-pressure cleaner or a powerful water jet.
» Clean the CeBS components with a soft, lint-
free cloth, slightly moistened if necessary.
– Use water or a mild detergent to clean
components (except for the battery!)
– Visually inspect the plug contacts on the
eBike and battery at regular intervals.
Always make sure the contacts are clean
and dry before inserting the battery. Use
a commercially available battery terminal
grease to maintain and protect the
contacts from adverse weather conditions.
» Before inserting the battery, make sure that
the contacts on the battery holder of the
eBike are dry.
6.2 Mttonnotocn
NOTE:
If the service symbol appears on the
display, a service interval has been reached. In this
case, contact your local cycle dealer to service
your CeBS.
» Perform regular visual inspections to establish
whether the electrical cables, connections and
contacts are clean and undamaged. Ask your
local cycle dealer to inspect damaged parts.
» Have your local cycle dealer perform any
repair and maintenance work required on the
CeBS.