3.2
Technical Specifications
Equipment accessories are all in the LV category (Low
Voltage) when using alternating current and VLV (Very
Low Voltage) when using direct current and are all
insulated.
3.3
Installation & Commissioning
3.3.1
Recommendations
The equipment can be left powered on 24*7. However,
it is recommended to turn off the power supply at
night.
3.3.2
Powering on
After a few seconds the main menu is displayed.
Use the directional arrows on the remote control or
the computer keyboard to move around inside the
menu. The OK key is used to validate the choice on
which the cursor is located. The ESC key is used to
return to the previous window and is available at all
times.
3.3.3
Navigation, getting started with the user
interface
The navigation functions are easy to use by pressing a
button.
The user interface can be fully operated at a distance
using a remote control. This feature is useful when
carrying out a test from inside a vehicle.
It is also possible to scroll through the menus using
the keyboard and a mouse.
In all data entry fields, a virtual keyboard displays to
carry out fast and intuitive data entry.
Brake Testing Bench
RBT240
RBT270
Minimum space between the wheels
800mm
800mm
Maximum space between the outside of the wheels
2,200mm
2,200mm
Max. Load per wheel
2,000kg
2,200kg
Power supply voltage
400V + Three
Neutral
400V + Three
Neutral
4 rollers
Ø
≥
200mm
Ø
≥
200mm
Roller speed
5km/h
5km/h
Motor power
2x 4kW
2x 4kW
Indicator roller
Ø50mm
Ø50mm
Maximum force
750 daN
1,200daN
The screen must not be directly exposed to
sunlight when using with a PC and touch screen
using IR technology.
In this case the touch function will be disrupted
and will not work properly.
In this case, it is recommended to pivot the screen slightly
away from the sunlight.
Operating Manual RBT240 / RBT270
Operating Manual RBT240 / RBT270
16
17
3.1.4
RBT270 and MK270: Braking Bench
RBT270 Class 4, 5L & 7 ATL
MK270 Motorcycle Adaptor
3.1.5
Remote Control
The remote-control kit is composed of an infrared
remote control and an infrared receiver.
Remote control
Infrared / USB receiver
Installation is a quick two-step process:
›
Connect the IR receiver to a USB port on the PC. The
driver installs itself automatically.
›
Place it so that it is in the operator's field of vision
when they are carrying out a measurement (see the
installation instructions for the special case of several
devices using the same remote control).
›
This remote control can be associated with 4
different items of equipment. Therefore, the remote
control must be associated to the different receivers.
Go to Settings and Specification.
Using the remote control with several items of
equipment:
Press the remote control corresponding to your A, B,
C or D equipment once.
You can use the other remote control keys, only the
selected equipment will receive the information.
For example, if the operator presses key A once.
Receiver A
Receiver B
Receiver C
Receiver D
Now just use the key:
Navigation in the menu:
The different elements are
selected using the
directional keys. The active
field is highlighted in blue.
The up and down keys are
used to change the selection
in the active field. The left and right keys are used to
switch fields.
When all the fields are correct, the user launches the
control by pressing OK.
Width of the braking area
800mm - 2,800mm
Height
300mm
Max. force
1,200 daN