Continental Refrigerator RBT240, Operation Manual, Page: 13 / 16

5 Settings
To launch the Settings menu, from the home page.
The following menu is displayed:
The settings menu is composed of different sub-
menus which are described in detail below.
5.1 Date/time:
Used to set the date and time on RBT240/RBT270s.
Select the field using the OK key, use the UP and
DOWN arrows to change the value. Then, to save the
new values, press OK.
Exit using the ESC key.
5.2 Garage Header
Used to enter and customise garage or MOT centre
related information. This information is printed on the
test report header.
5.3 Operator
Used to enter up to 9 operator names. The principle is
the same as for the "garage header".
To select the operator name on the main menu, press
the
top right zone and select the operator . This
name will be printed on the completed test report.
5.4 Centralisation
In order to connect to AWS, the equipment will require
an X.509 client certificate, which is issued by DVSA.
These certificates are being supplied to the Authorised
Examiner Designated Manager in a zip file format and
are unique for each client.
Unzip this file with Authorised Examiner Designated
Manager ID as password.
The minimum list files form DVSA required by
WIN9010 software:
› AmazonRootCA1.pem
› XXXX.cert.pem
› XXXX.private.key
› XXXX.properties
XXXX is a unique identifier for each client.
Copy them to USB stick.
Operating Manual RBT240 / RBT270 Operating Manual RBT240 / RBT270
24 25
4.3.3 Print Results
"F1" key : Restart a new test
"F2" key : Print results
"F3" key : Save results
"F4" key : Preview the results before printing
If you select Braking tab, you see the complete
test report.
In ATL mode you have the test result.
OK if you want a test report with the car
ESC if you want the complete table
Example if your press OK: