Teledyne Continental Motors, Inc.
TM
Maintenance
Inspections
IOF-240 Series Engine Maintenance Manual
7-61
31 August 2007
Change 1
Table 7-10.
Cylinder Inspection Checklist
Engine Model Number: ___________________ Engine Serial Number: _________________
Total Time Engine Has Been in Service: _______________
Time Since Major Overhaul (TSMOH) __________________ Engine in Storage? ________
Date Inspection Performed: ________ Inspection Performed by:_____________________
Inspection Item
Inspector Comments
Complete the cylinder inspection according to the instructions in the Maintenance Manual; heeding all
warnings, cautions and notes. Place a check mark in the block to indicate completion of the inspection on each
cylinder. Note discrepancies in the Inspector Comments column.
Complete a visual inspection of the cylinder exterior and power
stroke areas for signs of cracks, leaks, rust or pitting (Section
7-3.7.1).
Cylinders
1
2
3
4
T
T
T
T
Complete a visual inspection of the cylinder head barrel, fins,
ports and bosses for evidence of fuel oil or soot (Section 7-
3.7.1).
Cylinders
1
2
3
4
T
T
T
T
Inspect the cylinder to crankcase mounting deck for visible
signs of RTV sealant (Section 7-3.7.4).
Cylinders
1
2
3
4
T
T
T
T
Differential Pressure Check (Section 7-3.7.2)
Baseline Master Orifice Calibrated Pressure
Reading:
Cylinder Pressure Reading
1
2
3
4
NOTES:
Page 1 of 3
