10
Contononta netin Synne
REMOTE
5.2 Uyn:
Opnrtntog nhn ne
5.2.1 wtnchtog nhn ne /
dtypatS Co tod Cff
NOTE:
Support level 0 is always selected auto-
matically when the CeBS is switched on.
1. Press and hold the
button for 1 second to
switch on the CeBS.
System information appears on the display
(
see document DISPLAY).
2. Press and hold the
button for 3 second to
switch the CeBS off.
T h e s u p p o r t l eve l s w i tc h e s to 0.
The system switches off.
5.2.2 nancntog nhn yuppCrn anvna
NOTE:
For information on the support levels,
see document DRIVE UNIT.
» Press the
1
button or push the joystick
3
forwards/up to gradually switch to a higher
support level.
» Press the
2
button or push the joystick
3
back/down to gradually switch to a lower
support level.
1
2
Fig.: Selecting the support level (Ergon 1.0/
Ergon 2.0)
3
Fig.: Selecting the support level (Shift 1.0/
Shift 2.0)
5.2.3 Uytog nhn puyh hnap
WARNING!
Risk of accident and injury!
Incorrect use of the push help poses a risk of
injury.
»
Only use the push help to assist you in
pushing the eBike. Do not use the push help
to propel the eBike forwards while you are
sitting on it.
CAUTION!
Risk of injury!
If you push the cycle while the push help is acti-
vated, the pedals will turn automatically. When
pushing your cycle,
»
maintain a sufficient distance from the
rotating pedals to avoid injury.
CAUTION!
Risk of injury!
Risk of injury from incorrect handling.
»
Select support level 0 or switch off the CeBS
before pushing your eBike without the push
help.
NOTE:
When pushing the eBike, the push help
provides assistance up to a maximum speed
of 6 km/h, depending on the manufacturer’s
configuration.
1. When necessary, press the
2
button
several times on the Ergon model or push the
joystick
3
back/down on the Shift model to
select the push help
function.
2. Press and hold the
1
button on the
Ergon model or push and hold the joystick
3
forwards/up on the Shift model to activate
the push help.
The push help sets the eBike (and the pedals)
in motion.
3. Release the
1
button or the joystick
3
to deactivate the push help function.
The CeBS switches automatically from the
push help
to support level 0.
Summary of Contents for Ergon 1.0
Page 1: ...Original instructions Remote Ergon Shift Continental eBike System ...
Page 2: ......
Page 14: ......
Page 15: ......
