Continental Refrigerator DT, Original Instructions Manual

Page: 14 / 20

14 Contononta netin Synne eATTERY
5.2.4 Vtnwtog nhn btnnnrS chtrgn anvna
( O ) & hntanh ( OH)
The LED display 4 on the battery shows the
current charge level of the battery (SOC="state
of charge") and the current health or residual
capacity of the battery cells (SOH="state of health"
of the battery).
1. Remove the battery from the eBike.
2. Briefly press the battery button
10
once to
wake up the battery.
3. Briefly press the battery button 10 once to
display the SOC.
4. Briefly press the battery button 10 twice to
display the SOH.
NOTE: The SOH (State of Health) indicates the
ratio between the available capacity and the rated
capacity. The capacity indicates the maximum
amount of power that can be drawn from a fully
charged battery.
4
10
Fig.: Battery button/LED display
(iDT 660 DCW)
4
10
Fig.: Battery button/LED display
(iDT 600, iDT 450, DT 500)
LED dtypatS: etnnnrS chtrgn anvna ( O )
LED display Charge level
(approximate
value)
1 LED flashes 0-10 %
1 LED lit 11-20 %
2 LEDs lit 21-40 %
3 LEDs lit 41-60 %
4 LEDs lit 61-80 %
5 LEDs lit 81-100 %
LED dtypatS: Rnytduta ctptctnS Cf nhn btnnnrS
cnaay ( OH)
LED display Residual capacity
(approximate
value)
1 LED lit 0–20 %
2 LEDs lit 21-40 %
3 LEDs lit 41-60 %
4 LEDs lit 61-80 %
5 LEDs lit 81-100 %
5.2.5 etnnnrS eCdny
The battery management system automatically
adapts the battery to the activity of the CeBS.
Four battery modes supply the required power
and ensure effective use of the battery capacity.
Mode Meaning
Acntvn eCdn Regular
power consumption:
When the CeBS is switched
on or the battery is
connected to the charger,
the battery switches to
active mode automatically.
HtbnrotntCo
eCdn Power supply
deactivated:
When the CeBS has been
inactive for 100 minutes,
the battery switches auto-
matically to hibernation
mode. In hibernation mode,
the battery can retain
its charge for extended
periods without charging
and is protected from deep
discharge to maintain
maximum durability.