*IMPORTANT SAFEGUARDS:
1. Before using machine always carefully read and comply with all these instructions.
We cannot accept any responsibility for the consequences of improper use.
2. Check voltage to be sure that the voltage indicated on the name plate agrees with your
voltage.
3. Close supervision is necessary when the appliance is used by people. Place the machine
out of the reach of children and persons with limited capabilities.
4. Do not place on or near a hot gas or electric burner or in a heated oven.
5. Unplug from outlet when notin use and before cleaning. Allow to cool before putting or
taking off parts, and before cleaning the appliance.
6. Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions, or has been damaged in any manner. Return appliance to the nearest
authorized service facility for examination, repair or adjustment.
7. The use of accessory attachment not recommended by the appliance manufacturer
may result in fire, electric shock, or injury to persons.
8. Be careful to ensure that the power cable does not become trapped and does not rub
against sharp edges.
9. Do not let the cord hang over the edge of a table or counter, or touch hot surfaces.
10. Do not touch any hot parts. Use the handle of the funnel.
11. This appliance has been incorporated with a grounded plug. Please ensure the wall
outlet in your house is well earthed.
12. To protect against fire, electric shock and injury to persons, do not immerse cord,
plugs, or body of machine in water or other liquid.
13. Do not use outdoors.
14. For household use only.
SAVE THESE INSTRUCTIONS
*CLEANING MINERAL DEPOSITS
1. The machine builds up limescale deposits over time, and you need descale the machine
2-3 months.
2. Fill the tank with clean water and descaler( the scale of water and descaler is 4:1, the
detail refers to the instruction of descaler. Please use “household descaler”, or you can
use the citric acid (obtainable from chemist’s or drug stores) instead of the descaler (the
one hundred parts of water and three parts of citric acid).
3. According to the program of make espresso coffee, put the pressurized funnel (no
coffee powder in it) and carafe (jug) in place. Brewing water per “B. MAKE ESPRESSO
COFFEE”.
4. Turn the knob to position, the indicator will be illuminated, and make two cups
coffee (about 120ml). Then turn the knob to position and wait for 5s.
5. Turn the knob to position and make steam for 2min, then turn the knob
to position to stop the unit immediately, make the descalers deposit in the unit
vat least 15 minutes.
6. Restart the machine, repeated the steps of 4-5 for three times
7. Then turn the knob to
position to brew until no descaler is left.
8. Then brewing coffee (no coffee powder) with water in the MAX level, repeat the steps
of 4-5 for 3 times (not need to wait for 15 minutes in step of 5), then brewing until no water
is left in the tank.
-
9. Repeat the step of 8 at least 3 times to make sure the piping is cleanly.