Continental Refrigerator AUTODIAGNOS TPMS SE, User Manual, Page: 23 / 26

TPMS SE TOOL User Guide
23
USB Power
supply connector
MISCELLANEOUS
1. CHARGE
Low Battery Indication
Your TPMS TOOL incorporates a low
battery detection circuit. Battery life is an
average of 300 sensor tests per battery
charge (approximately 60 to 80 vehicles)
this may change depending on the
sensor model.
Battery indicator status:
0% 25% 50% 75% 100%
When 0% is flashing, the tool will turn off after
10 seconds.
The battery is charging.
There is an issue with the battery - please
contact after sales service.
DO NOT use the tool with low battery status (0-25%) because the transmission and emission
may not be reliable.
When charging, the battery light is red and
becomes green when the battery is fully charged.
Fig. 6
When the battery is low, the “status bar” appears every 10 seconds. This display will stop
when the battery loses power.
Plug the USB cable between the tool and the charger adapter, and then plug the charger
adapter into an appropriate outlet. The red LED "
CHARGE " light will turn on.
Battery replacement
The tool must be returned to the factory for battery replacement.
Opening the tool or tampering with the seal placed on the tool, if broken, will void the
warranty