EN-14
HOLD:
Hold the current page and present again.
:
Play
:
Pause
:
Stop
/ :
Fast reverse / forward.
/ :
Skip to previous / next track or chapter.
Notes:
The remote control shall be applied in effective reception
scope of the television. Make the remote control point
towards the infrared receiver of the television and ensure
that there are no obstacles. Its normal operation distance
will be shortened in direct sunlight or lamplight.
Be careful to use the remote control. avoid falling
off or being trampled or splashed with liquids.
Battery replacement
1
Open the battery cover on the
remote control.
2
Insert two AAA size batteries
making sure to match the positive
and negative icons of battery and
battery compartment.
3
Then close the battery cover.
Notes:
- Please take out the batteries and place in
a shady, cool and dry place if you will not
use the remote control for long time.
- Please tread damaged or leaking batteries
with care. Please wash your hands with
soap after contact with battery chemicals.
- Do not randomly dispose of used
batteries. Please refer to local authorities
for recycling or waste treatment systems.
Note: The batteries are not included.
Automatic standby
The power consumption of this unit during operation and standby mode has been
reduced. Therefore, if no action is recorded after four hours, the unit will automatically go
into sleep mode. To cancel the sleep timer, simply press a key.
