manualshive.com logo in svg

Conti TWIN STAR 2, Technical Documentation Manual

Share
Download
Conti TWIN STAR 2 Technical Documentation Manual Download Page 11

 

 

 

 

Wait for 5 seconds to go out of the programming mode before making coffees. 

 

 

During the programming of one group, the other groups do not work (including the hot water). 

 

 

The data are stored even if the machine is switched off. 

 

7.2.2  Programming of tea measure : 

 

 

Insert and turn the programming key. The displays indicate: 

 
 

Water volume 

Programming

 

Parameters 

Programming

 

Parameters 

Programming

 

 
 
 

 

Press the push-button 

CAPPU. 

 

The LED of the CAPPU button 

blinks

: PROGRAMMING MODE. 

 

Press the HOT WATER button to program: the hot water solenoid valve is activated. 

 

When the hot water measure is reached, press the hot water button again to stop the flow. 

 

The data is stored. 

  

 
NOTES: 

 

 

Maximum flow time of the hot water measure: 

120 seconds. 

 

 

Wait for 5 seconds to go out of the programming mode before starting the flow. 

 

 

The data are stored even if the machine is switched off. 

 

7.2.3 

Programming of  steam measures 

: 

 

If the machine is fitted with this optional device the steam programming is available in the 
PROGRAMMING MODE (“Bar” menu”) – see chapter 5.6. PROGRAMMING 

 
 

7.3 Beverage 

preparation 

 

7.3.1 Coffee delivery:  

 
The machine has to be switched on and the security water level in the steam boiler reached 
(sensor SS). 
 
Machine switched on and no delivery: all the LEDs are lit. 
 
Press the push-button to deliver the programmed coffee measure (each push-button could be 
programmed with a different measure – see PROGRAMMING MODE). 
 
To stop the coffee flow press one of the 5 push-buttons of the operating group (except the push-
button CAPPU of the left group) 

 
Press the selected push-button:

 

-  The pump and the solenoid valve of the group are activated. 
-  The LED of the selected button is lit, the other LEDs of the group are turned off. 
-  The LEDs of the other groups are lit, the “Cappuccino” LED is also lit. 

 
The flowmeter detects the volume of water. When the programmed quantity is reached

 

-  the flow stops automatically, 
-  the pump and the solenoid valve of the group are deactivated. 

 9 

Summary of Contents for TWIN STAR 2















































Reviews:

No comments

Brands by name

Popular brands

Load more brands