Installation
18
Scanner calibration
Calibration is initiated automatically as part of the scanner installation.
•
Press
Calibrate
to start the wizard
•
Follow the wizard instructions to perform scanner calibration
•
If you did not clean the internal scan area and glass as instructed in the previous
installation steps do so now
•
You will be asked to insert the calibration sheet that came with the scanner
•
Be sure to align the sheet arrow with the scanner middle arrow.
•
Press the Full Calibration button (automatic process)
•
The wizard will notify you when the calibration completes successfully
•
After completion remove the calibration sheet
•
See the
Scanner Maintenance and Calibration Guide
for more information
18
