Maintenance
33
Calibration
Scanner calibration is very easy to perform. Calibration is carried out using the
WIDEsystem
program you installed with your drivers. After manually cleaning the
scan area, you just start the
Calibration
wizard
and
let it take over. The wizard will ask you to insert a calibration sheet. Other than that, scanner calibration is
completely automatic.
NOTE:
Cleaning and calibration are tied together. Cleaning the scanner creates the need for renewed calibration and correct calibration will always require
a clean scan area.
Calibration
Turn the scanner power ON
Make sure that the scanner has been turned ON and in
Wake
mode for at
least
5 minutes
prior to calibration. The short warm-up time will ensure that
camera and light conditions have stabilized.
1
