Contec VPC-3000, User Manual, Page: 96 / 125

7
．
Software RAID setup
User’s Manual
89
Delete RAID drive (Mirroring)
Name Level Drives Capacity Status Bootable
***** RAID1(Mirror) 2 ***GB ***** Yes
Deleting a volume will reset the disks to non-RAID.
WARNING: ALL DISK DATA WILL BE DELETE.
(This does not apply to Recovery volumes)
[↑↓]Select [ESC]-Previous Menu [DEL]-Delete Volume
Figure 7.4 RAID drive delete screen
1. Select “Delete RAID Volume” by pressing the <Enter> key or the <2> key in the Main window.
When all mirroring-
configured RAID drives are displayed, press the <↑> and <↓> keys to move to
the RAID drive to be deleted and press the <DEL> key.
2. When you are prompted to confirm that you are deleting the selected RAID drive, press the <Y> key.
3. The RAID drive will be deleted from “RAID Volume” in the Main window. Its “Type/Status” will
indicate “Non-RAID Disk”.
4.
Press the <↑> and <↓> keys to select “Exit” in the Main window, and confirm your choice by
pressing the <Enter> key or the <4> key.
5. When you are prompted to confirm that you are saving the current settings, press the <Y> key to exit
the RAID utility.
When an existing RAID drive is deleted, data may be lost. Back up the data on a RAID drive before
deleting it if the data is important.
CAUTION
[ DELETE VOLUME MENU ]
[ HELP ]