Contec VPC-3000, User Manual, Page: 93 / 125

7
．
Software RAID setup
86 User’s Manual
MAIN Window
When you start the RAID utility, the main window appears.
1. Create RAID Volume 4. Recovery Volume Options
2. Delete RAID Volume 5. Acceleration Option
3. Reset Disks to Non-RAID 6. Exit
RAID Volumes:
None defined.
Physical Devices:
ID Drive Model Serial # Size Type/Status(Vol ID)
* *********** ************* ***GB Non-RAID Disk
* *********** ************* ***GB Non-RAID Disk
[↑↓]-Select [ESC]-Exit [ENTER]-Select Menu
Figure 7.2 MAIN Window
1. The cursor keys <
↑
>, <
↓
>, <
→
>, <
←
> allow you to navigate through menu items and the <Enter>
key allows you to choose among them.
(You can also select items by entering menu numbers 1 to 4 with the keyboard.)
2. You are prompted to confirm that you are saving the current settings. Press the <Y> key to save them
and press the <N> or <ESC> key to exit the RAID utility without saving them.
- RAID Volume : Displays the type, volume, and status of the created RAID drive.
- Physical Disks : Displays hard disks which will be the target of the RAID drive.
Create RAID Volume : A RAID drive can be created. The type and capacity of the created RAID
drive can be set when it is created.
Delete RAID Volume : An existing RAID drive can be deleted. If deleted, data will be lost.
- Exit : Exit RAID utility.
[ MAIN MENU ]
[ DISK/VOLUME INFORMATION ]