Contec VPC-3000, User Manual, Page: 49 / 125

3
．
Hardware setup
42 User’s Manual
◆
Attaching the extension board
(1) After unscrew the screw, remove the slot cover in the back of the chassis.
Figure 3.23 Removing the slot cover
(2) The extension board is installed, and it fixes with the screw.
Figure 3.24 Attaching the extension board
Please install it very carefully might interface with the bend of various cables in the case when you
install it according to the size of the extension board that installs it.
■Maximum dimensions of boards that can be installed
176mm(L)×110mm(H) (All PCI Express x16,PCI Express x4,PCI bus)
(3) Reverse the attachment procedure and remove it.
Push in the extension board
securely as far as it will go.
Screws