Contec VPC-3000, User Manual, Page: 109 / 125

8
．
Hardware RAID setup
102 User’s Manual
◆
Locations and settings of switches and connectors
Once you have removed the case cover, the bracket for the riser card, and the mirror card bracket, you
will be able to see the connectors and jumpers as illustrated below.
Figure 8.1 Locations and settings of switches and connectors
Table 8.2 Switch list
Name Function
Factory default
setting
Remarks
S1 DIP switch setting
1
～
10 all OFF
State usually
Table 8.3 Connector list
Name Function
CN1 Serial ATA connector (HDD1)
CN2 Serial ATA connector (HDD2)
CN3 Serial ATA connector
CN4
※
2
CN5
※
2
CN6
※
2
※
2 Do not use these.
DIP switch