Contec VPC-1600, User Manual, Page: 38 / 115

3. Hardware setup
VPC-1600 User’s Manual
31
Jumper setting
CMOS clear setting : JP1
CMOS Clear will reset the contents of the CMOS to initial BIOS values. Clearing the CMOS
will not reset the clock.
Table 3.3 CMOS clear setting
JP1 Function
State usually
(Factory default setting)
1-2 Short
CMOS clear
2-3 Short
- Always set CMOS Clear with the AC cable unplugged, and before reconnecting the power,
- restore it to its normal setting.
- Clearing the CMOS while the power is connected may damage the board.
ATX/AT mode setting : JP2
Use the factory default settings.
Table 3.4 ATX/AT mode setting
CAUTION
JP2 Function
ATX mode(Factory default
setting)
Open
AT mode
1-2 Short