background image

 

 

 

 

                                                                                 

Ver.3.11

 

 PIO-16/16L(PM) 

                                                                                                                                                                           

   

1

 

 

 

PC Card-compliant Opto-Isolated Digital I/O 

 

PIO-16/16L(PM) 

 

 

 
 
 

 
 
 
 

PIO-16/16L(PM) is a PC Card Standard compliant product for 
input/output of digital signals.  Users can use the card in PC 
card slots that support the PCMCIA 2.1/JEIDA 4.2 or later. 
The PC can be used to input the on/off state of a switch and to 
control a relay. 
The PC card can input and output up to 16 channels. 
With the included Driver library [API-PAC(W32)], users can 
configure Windows application software for this PC card in your 
favorite programming language supporting Win32 API functions, 
such as Visual Basic or Visual C/C++. 

 
 
 
 
 
 
 
- Individual external power supplies can be used for each common pin as it is shared by 16 signal points. 
- The PC card slot side and the I/O interface are isolated from each other by an opto-coupler, offering good noise immunity. 
- Users can use all of the input signals as interrupt inputs and select the interrupt trigger edge of the input signal. 
- The PC card has a digital filter feature to prevent noise or chatter from causing erroneous inputs. 
- Up to 35VDC, 100mA per signal, max. output. 
- The output transistor has a surge absorber connected to protect the PC card from surge voltages. 

 

 

 

 
 
Screw Terminal                      :EPD-37A    *1 
Screw Terminal                      :EPD-37    *1 
Termination Panel (M3)        :DTP-3(PC) 
Termination Panel                  :DTP-4(PC) 
Signal Monitor for Digital I/O:CM-32(PC)E    *1 
 
*1    A PCB37PS or PCB37PS optional cable is required separately. 
* Check the CONTEC Web site for more information on these options. 

 

 

 

 

Flat Cable with a 37-Pin D-type Connectors on 2Ends: 
PCB37P-1.5(1.5m), PCB37P-3 (3m), PCB37P-5 (5m) 
 
Shielded cable with two 37-pin D-Type connectors: 

 

PCB37PS-0.5P(0.5m), PCB37PS-1.5P (1.5m), PCB37PS-3P (3m), 
PCB37PS-5P (5m) 
 
Flat Cable with a 37-pin D-type Connector: 
PCA37P-1.5 (1.5m), PCA37P-3 (3m), PCA37P-5 (5m) 
 
Shielded Cable with Two 37-pin D-Type Connectors: 
PCA37PS-0.5P (0.5m), PCA37PS-1.5P (1.5m), PCA37PS-3P (3m) 
PCA37PS-5P (5m) 
 
D-SUB37P Male Connector Set (5 Pieces): 
CN5-D37M 

 

 
 

 
 
 

 

 
 

- PC Card [PIO-16/16L(PM)] …1 
- Cable with isolation unit[PIO-16/16L(PM)-BOX and CB-PM68/37] …1 
- User’s Guide…1 
- CD-ROM [API-PAC(W32)] …1 

 

CD-ROM

[API-PAC(W32)]

PC card

Guide

Guide

Cable with isolation unit

 

 

 

 

 

 

 

 

 

Drive Library [API-PAC]: Included 

Accessories

 

 

Components in your package

 

Features  

 

Optional Cable & Connector 

 

 

Summary of Contents for PIO-16/16L(PM)

Page 1: ...ent noise or chatter from causing erroneous inputs Up to 35VDC 100mA per signal max output The output transistor has a surge absorber connected to protect the PC card from surge voltages Screw Terminal EPD 37A 1 Screw Terminal EPD 37 1 Termination Panel M3 DTP 3 PC Termination Panel DTP 4 PC Signal Monitor for Digital I O CM 32 PC E 1 1 A PCB37PS or PCB37PS optional cable is required separately Ch...

Page 2: ... current sink output Negative logic Number of input signal channels 16 channels all available for interrupts 1 common pin Input resistance 3kΩ Input ON current 3 4mA or more Input OFF current 0 16mA or less Interrupt 16 interrupt input signals are arranged into a single output of interrupt signal INTA An interrupt is generated at the rising edge HIGH to LOW transition or falling edge LOW to HIGH t...

Page 3: ... 32 O 31 O 30 O 27 O 26 O 25 O 24 O 23 O 22 O 21 O 20 N1 PIO 16 16L PM can be connected the input signals to a device which can be current driven such as a switch or transistor output device The connection requires an external power supply to feed currents The PC card inputs the ON OFF state of the current driven device as a digital value Input Circuit External circuit 3kΩ 3kΩ Vcc Vcc Optocoupler ...

Page 4: ...tputs are reset to OFF Connection to the LED O 20 CN1 21 pin LED 5 1kΩ Output plus common CN1 37 pin PIO 16 16L PM side Output minus common CN1 20 pin External power supply 12 to 24VDC When 1 is output to a relevant bit the corresponding LED comes on When 0 is output to the bit in contrast the LED goes out Example of Connection to TTL Level Input Output plus common Output Output minus common TTL l...

Reviews: