4. Hardware Setup
Hardware Manual
25
Panel cut dimensions Figure
199
+1
-0
15
5
+1 -0
Panel thickness range 1.6 - 7mm
[mm]
Figure 4.4. Panel cut dimensions figure
CAUTION
Use a panel with a thickness in the range 1.6 - 7mm.
Removing the cover for OS operation setup DIP switch (SW2)
When setting the SW2, you need to remove the back cover.
(1) Undo the 2 flat-head screws and remove the cover.
Figure 4.5. Removing the cover for OS operation setup DIP switch
