Contec FXA3000 Series, User Manual, Page: 109 / 113

8. Appendix
102 FXA3000 Series
Specifications
Table 8.2. Specifications
Name Specifications
Unit Type Access point / Station / Repeater
Wired LAN
Ethernet standard IEEE802.3(10BASE-T), IEEE802.3u(100BASE-TX), IEEE802.3af
Port Speed / Communication type /
Number of ports
10/100Mbps/Half Duplex, Full Duplex / 1
Wireless LAN
Wireless Networking Standard IEEE802.11n, IEEE802.11a, IEEE802.11b, IEEE802.11g
Channel Varies depending on the country in which the product is used.
IEEE802.11n
Data transmission speed *1
300 - 6.5Mbps[MSC0 - 15, Short/Long GI] (Fixed/Auto)
IEEE802.11a
Data transmission speed *1
54, 48, 36, 24, 18, 12, 9, 6Mbps (Fixed/Auto)
IEEE802.11b
Data transmission speed *1
11, 5.5, 2, 1Mbps (Fixed/Auto)
IEEE802.11g
Data transmission speed *1
54, 48, 36, 24, 18, 12, 9, 6Mbps (Fixed/Auto)
Security
IEEE802.11n
WPA(AES), WPA2(AES), WPA-PSK(AES), WPA2-PSK(AES),
WSL(combination mentioned above are possible)
IEEE802.11a/b/g
WEP(open/ Shared Key /Auto), WPA(AES, TKIP), WPA-PSK(AES,TKIP),
WPA2(AES, TKIP), WPA2-PSK(AES,TKIP), IEEE802.1X(EAP-TLS, PEAP),
WSL(combination mentioned above are possible)
Antenna chip-antenna×2 MIMO
External dimension (mm) Unit only: 136.2(W) x 100.0(D) x 31.0(H) including power cable
disconnection prevention hook
With connector cover attached: 170.0(W) x 100.0(D) x 31.0(H)
Weight 220g (Unit only), 250g (With connector cover attached)
*1 These are theoretical values based on their respective wireless LAN standards; they do not indicate actual data transfer
rates.
Environmental Specifications
Table 8.3. Environmental Specifications
Name Specifications
Input voltage range 5VDC±5% (DC Jack), 5 - 30VDC±5% (power connector), 36 - 57VDC (PoE)
Rating input current 0.83A (5VDC input), 0.15A (30VDC input) (Max.), 0.13A (PoE input 48V)
Operating ambient temperature 0 - 40°C
Operating ambient humidity
10 - 90%RH (No condensation)
Floating dust particles Not extreme
Corrosive gases None
Permitted transient power failure 17ms or less (100VAC@25°C)
An automatic reset is performed when low voltage is detected.
Approval
standards
FXA3000-US FCC, IC, WPC, IMDA, UL/cUL, RoHS Compliant
FXA3000-EU NBTC, CE Marking (RE, RoHS)
FXA3000-KR KC, RoHS Compliant
FXA3000-TW NCC, RoHS Compliant