2. Setup
ECH-PCI-CE-H2B, ECH-PCI-CE-F2B, ECH-PCI-CE-H4B, ECH-PCI-CE-F4B
17
Setting up the hardware in Windows
At startup of Windows, the PCI-to-PCI Bridge used by this product are detected in sequence and
identified automatically by the Windows standard driver.
After that, the PCI boards installed on this product are detected in sequence.
For setting up and checking the boards used on the expansion chassis, refer to their respective manuals.
Checking the hardware in Windows
You can use Device Manager to check whether this product has been identified in Windows. Device
Manager shows “PCI standard PCI-to-PCI bridge” under “System devices”.
Figure 2.9. Sample screen shot of Device Manager
CAUTION
The expansion chassis does not depend on the OS in use.
