Contec DS-380D Series, User Manual

Page: 38 / 69

5. BIOS Setup
PCI Subsystem Settings
Use this menu to specify PCI Subsystem Settings.
Aptio Setup Utility - Copyright (C) 20xx American Megatrends, Inc.
Main Advanced Chipset Boot Security Save & Exit
PCI Bus Driver Version
V 2.05.02
PCI Common Settings
PCI Latency Timer
[32 PCI Bus Clocks]
VGA Palette Snoop [Disabled]
PERR# Generation [Disabled]
SERR# Generation [Disabled]
→←:Select Screen
↑↓:Select Item
Enter:Select
+/-:Change Opt.
F1:General Help
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Version x.xx.xxxx. Copyright (C) 20xx American Megatrends, Inc.
Figure 5.3. PCI Subsystem Settings
Items that can be configured for PCI subsystem settings are described in the table below.
Table 5.3. PCI Subsystem Settings
Item Options Description
PCI Latency Timer
32 PCI Bus Clocks
64 PCI Bus Clocks
96 PCI Bus Clocks
128 PCI Bus Clocks
160 PCI Bus Clocks
192 PCI Bus Clocks
224 PCI Bus Clocks
248 PCI Bus Clocks
Value to be programmed into PCI Latency
Timer Register.
VGA Palette Snoop
Disabled
Enabled
Enables or disables VGA Palette Registers
Snooping.
PERR# Generation
Disabled
Enabled
Enables or disables PCI device to generate
PERR#.
SERR# Generation
Disabled
Enabled
Enables or disables PCI device to generate
SERR#.
DS-380D Series User’s manual
31