—
How To Use Collection Data
—
M2M Gateway PLC Communication Settings
—
82
—
2.
CONPROSYS HMI
This section describes how to use the information collected from PLCs and also the information
instructed to PLCs with "CONPROSYS HMI".
*The "CONPROSYS HMI" is a monitoring function installed as standard features on the CONPROSYS.
Signal collection from PLC and instructions to PLC are executed by PLC communication task
processing, and assigned to Modbus memory.
Accessing PLC information with the "CONPROSYS HMI" can be realized by accessing Modbus
memory information.
In this Guide, the functions up to referring to PLC data are explained.
As for the basic operations and functions of the "CONPROSYS HMI", please refer to the "Reference
Manual (Software)" or "Online Help".
1.
CONPROSYS HMI Link Setting
With "CONPROSYS HMI", Modbus memory can be referred to by using the "Device Tree" as the same
way that other TAG data (variables) are assigned.
- Displaying the Device Tree
1. Start up the "Device Tree" in the 2. Select a desired Modbus memory address
Property link of each object. from the "Device Tree" for reference.
: Device Tree startup icon
Note : Up to 1000 Modbus memories can be referred to.
Please see the following page for other reference method.
[PLC]
[M2M Gateway]
PLC comm
task
Device
memory
Modbus
CONPROSYS
HMI