Contec CONPROSYS CPS-PCS341MB-DS1-1201 Reference Manual Download Page 20

Page: 20 / 65

—

Product Nomenclature and Function

—

CPS-PCS341MB-DS1-1201 Reference Manual (Hardware)

—

Nomenclature of Product Components

Component names of the product are shown in the figure below.

No.

Name

Function

1 Stack Bus

Used for power supply and communication with the configurable type

module.

2 Maintenance Connector Do not use it.
3 Power Connector

Use the 3-pin connector, included in the package.

4 LED Indicator 1

This indicates status of the product.

5 Rotary Switch

Used for user setup.

6 Digital I/O Connector

This is a connector for digital I/O. (Use the 6-pin connector, included in
the package)

7 LAN Port

This is a connector for LAN.

8 DIP Switch

This is used for user setup.

9 Power Switch

This is used for controlling of the power supply.

10 SD Card Slot

This is for data storage.

11 LED Indicator 2

This indicates the status of the product.

12 USB Port

This is a USB port of type-A.

13 RS-232C Serial Port

This is a RS-232C serial ports (male).

Summary of Contents for CONPROSYS CPS-PCS341MB-DS1-1201


































































Search results

Summary of Contents for CONPROSYS CPS-PCS341MB-DS1-1201

Reviews:

Related manuals for CONPROSYS CPS-PCS341MB-DS1-1201

Brands by name

Popular brands

Contec CONPROSYS CPS-PCS341MB-DS1-1201, Reference Manual

Search results

Summary of Contents for CONPROSYS CPS-PCS341MB-DS1-1201

Reviews:

Related manuals for CONPROSYS CPS-PCS341MB-DS1-1201

Brands by name

Popular brands