Contec CONPROSYS CPS-MCS341-DS1-111, Reference Manual

Page: 23 / 72

—
Product Nomenclature and Function
—
CPS-MCS341-DS1-111, CPS-MCS341-DS1-131 Reference Manual (Hardware)
— 23 —
1. Nomenclature of Product Components
Component names of the product are shown in the figure below.
No. Name Function
1 Stack Bus Used for power supply and communication with the configurable type
module.
2 Maintenance Connector Do not use it.
3 Power Connector
Use the 3-pin connector, included in the package.
4 LED Indicator 1 This indicates status of the product.
5 Rotary Switch Used for user setup.
6 Digital I/O Connector This is a connector for digital I/O. (Use the 6-pin connector, included in
the package)
7 LAN Port This is a connector for LAN.
8 DIP Switch This is used for user setup.
9 Power Switch This is used for controlling of the power supply.
10 SD Card Slot This is for data storage.
11 LED Indicator 2 This indicates the status of the product.
12 USB Port This is a USB port of type-A.
13 RS-232C Serial Port This is a RS-232C serial ports (male).
14 DIP Switch 2 This is used to run SDK
CPS-MCS341-DS1 -111
A
B
SD
TX
R X
MCOM
DIO0
DIO1
DIO2
DIO3
N.C
SW1
24V DC
V+
V-
A
A
1
2
3
9
8
4
5
6
7
A
B
SD
TX
RX
MCOM
DIO0
DIO1
DIO2
DIO3
N.C
SW1
24V DC
V+
V-
A
A
1
2
3
9
8
4
5
6
7
CPS-MCS341-DS1 -131
14
(Inside)
14
(Inside)