—
PLC-Backup
—
CPSA-PCB100 Reference Manual
—
70
—
4.
Configure Schedule Setup
1
Refer to
menu
(Page47)
to start Web browser.
2
From “PLC-Backup” menu, select [PLC Communication Setup] – [Edit] and move on.
The page below [Edit] appears.
(This is the page to set the PLC backup)
3
In Schedule page, you need to enter the “Schedule information” corresponding to the number
of PLCs to be connected.
4
In “Current Value”, the backup schedule currently set is displayed.
5
Enter the backup execution day in “Input Value” in accordance with PLC.
6
Click the “Register” button to confirm the information.
7
When the settings have been confirmed, the message “Registration completed” appears in the
message field.
