—
PLC-Backup
—
CPSA-PCB100 Reference Manual
—
65
—
3.
PLC Communication Setup
1.
Configure PLC Setup (Basic)
1
Refer to
menu
(Page47)
to start Web browser.
2
From “PLC-Backup” menu, select [PLC Communication Setup] – [Edit] and move on.
The page below [Edit] appears.
(This is the page to set the PLC basic information. [Page Switch] – [Basic])
3
In the Basic page, you need to enter the “PLC basic information” corresponding to the number
of PLCs to be connected.
4
In “Current Value”, the PLC basic information currently set is displayed.
5
Enter the PLC information in “Input Value” accordingly.
6
Click the “Register” button to confirm the information.
7
When the settings have been confirmed, the message “Registration completed” appears in the
message field.
8
Click the “Return” button to go back to the [PLC Communication Setup].
