2. Setup
22
COM-1(LPCI)H,
COM-2(LPCI)H, COM-4(LPCI)H
Step 3 Initializing the Software
This assigns COM ports to the serial ports on the board. In case of Windows 8, 7, Server 2008, Vista, XP,
Server 2003 and 2000, you can also change a previously assigned COM port number to a different
number.
For use under Windows 8, 7, Server 2008, Vista, XP, Server 2003,
2000
On Windows 8, 7, Server 2008, Vista, XP, Server 2003 and 2000, the COM ports are already assigned by
the hardware installation step. Run Device Manager as described below if you wish to view or modify
the COM port settings.
Start Device Manager
(1) Select "System" from "Control Panel" and start [Device Manager].
(2) Check that the new COM ports are displayed in the [Ports] folder.
* The name of the board
you have just added is
displayed.
- COM-1(LPCI)H
- COM-2(LPCI)H
- COM-4(LPCI)H
