2. Setup
10
COM-1(LPCI)H,
COM-2(LPCI)H, COM-4(LPCI)H
Using the Board under Linux
Using the Standard COM Driver Software COM Setup Disk
You can perform application program development using the "Standard COM Driver Software -
COM Setup Disk" in the supplied CD-ROM. The procedure for using the software is described in the
\Linux\Readmee.htm file.
See also the following parts of this manual as required.
This chapter Step 1 Setting the Hardware
Operating Systems Other than Windows or Linux
Refer to the following if using on an OS other than Windows or Linux.
This chapter Step 1 Setting the Hardware
Chapter 4 Functions
Chapter 6 About Hardware
