To program your TV / VCR combination unit...
1. First, program your remote as a TV
Following the steps in this section, find a TV Setup
Code that operates the TV functions of your TV /
VCR (power, vol + / – , mute, ch + / – 0 – 9).
2. Then, program your remote as a VCR
Following the steps in Section 6 for code number
programming, enter, lock and test each 3-digit
VCR Setup Code until a code is found that
operates the VCR functions of your TV / VCR
(play, stop, fast-forward, rewind, pause, record).
Note: You can not use the Point and Press
TM
Programming method to program the VCR
functions of the TV / VCR.
If you have a TV that’s operated by remote control, it
is recommended that you plug it directly into a wall
outlet instead of the cable set-top terminal.
To program your TV...
1. Turn on your TV.
2. Press [TV], then [SELECT] together - hold both
buttons down until [TV] illuminates.
3. a. Press and hold [CH +] until your TV turns off.
As soon as your TV turns off, release [CH +].
OR
b. From the TV Setup Code list, locate and enter
a 3-digit code for your brand. If multiple codes
are listed, you may have to enter several codes
until your TV turns off.
4. Press [MUTE]. If your TV turns back on, press
[TV] to lock in the code. The [TV] button will blink
and go out.
If your TV does not turn back on, repeat steps 3
and 4 until you can turn your TV off and on
❶
.
Write your TV brand & setup code
.
Refer to section 16 for code number readback.
❶
Note When using the Point and Press
TM
Programming method (step 3a). If you find a code
that turns your TV off but not back on (step 4),you
may have gone past the correct matching code. Try
pressing [CH–] one press at a time until you find a
code that turns your TV back on.
2
2
1. Introduction
Your CheckMate™ IV (Model RT-U49C) universal
remote control is simple to program, easy to use, and
can operate up to four (4) devices, which include:
2. Before Getting Started
Some of the special features and buttons on your
remote control are as follows:
Point and Press
TM
Programming
Let’s you program your TV, VCR Audio devices
without codes. For more information, see sections
5, 6 and 7.
[ALL]
Turns all of your devices on / off with one button
press. [ALL] can even be programmed to
automatically tune your TV to its correct output
channel. For more information, see section 8.
[Movies], [Sports], [News]
Program your favorite channels on the “Movies”,
“Sports” and “News” buttons. For more information
see section 9.
[VCR / VOD] Toggle
“Toggles” the VCR buttons between cable Video-
On-Demand (VOD) and VCR / DVD functions. For
more information, see section 10.
SmartKeys
TM
Program multiple button presses on the [CBL], [TV]
and [BYPASS] buttons. For more information, see
section 15.
[DEVICE]
Tells which device you are currently operating by
illuminating the device’s power button. While the
current device is illuminated, press a nonilluminated
power button to operate a different device.
Memory Guard
TM
Eliminates reprogramming after battery changes.
Time Out
Shuts remote off if any button is pressed and held
for 45 seconds. This extends battery life in the
event the remote becomes lodges under or
between heavy objects.
Before you can use your remote control, it must be
programmed (set-up) to operate the above devices.
CABLE
TV
VIDEO
AUDIO
Cable set-top terminals
Televisions
VCR, DVD
Cassette deck, CD, receivers,
amplifiers, 2
nd
TV, 2
nd
VCR.
5
5
5. Programming Your TV
3
3
Reset
Lets you reset your remote to its original default
settings. For more information, see section 17.
3. Installing / Replacing Batteries
Install two (2) new “AA” batteries as indicated by the
diagram in the battery compartment.
When the illuminated buttons become dim or do not
illuminate during use, install two (2) new “AA” size
batteries.
Your remote control has Memory Guard
TM
, which
eliminates reprogramming after battery changes.
4. Programming Your Cable Set-Top Terminal
Model RT-U49C is pre-programmed to operate
the Scientific-Atlanta Explorer , Pioneer Voyager
and Pace 510 digital set-top terminals.
To operate a different cable set-top terminal, look up
the brand and model in the Cable Setup Code list. If
you are not sure of your brand and model, contact
your cable company.
To program your cable set-top terminal...
1. Turn on your cable set-top terminal.
2. Press [CBL], then [SELECT] together - hold both
buttons down until [CBL] illuminates.
3. From the Cable Setup Code list, locate and enter
the 3-digit code for your brand and model.
4. Press [CBL] to lock in the code. The [CBL]
button will blink and go out.
Write your cable set-top terminal brand & setup
code__________
Refer to section 16 for code number readback.
Cable Setup Codes
4
4
Pace
510 digital
004
Philips
digital
017
Pioneer
Voyager
004
BC-4600, BA-6000
008
BA-9000
009
BA-V1000, BA-V2000
010
Tocom
5503VIP, 5507, 5508
011
Zenith
Z-Tac
012
MM2500
013
Oak
Sigma One, P1, P2, P3
014
Sigma 2000
6
6
TV Setup Codes
Admiral
058 061 062 067
Adventura
004
Akai
065
Aiwa
135
Amark
007 086
Ampro
112
Amstrad
006
Anam
088 089 093 111 120 125 134
AOC
065
Audio Vox
111
Belcor
041
Bell & Howell
062
Broksonic
011 054
Brokwood
041
Candle 027
052
Centurion 044
051
Citizen
027 052 059 062
Concerto 041
051
Contec 020
Coronado 007
Craig
134
Crown 007
Curtis Mathes
044 061 062
Daewoo
027 039 040 041 042 051 090 091
092 094 101 102 108 114 118 121
123 130
Daytron
041 044 051
Dumont 041
Electro Home
041 051
Elektra 002
Emerson
007 008 011 012 017 054 065 079
108 110 131
Envision 041
051
Fisher 010
028
Funai 004
GE
005 019 027 031 037 041 046 051
053 055 061 070 131
Gibralta
007 025 027 031 041 044 051 059
060 065
Goldstar(LG)
007 027 031 041 044 059 060 065
124
Grundig 059
Hall Mark
041 051
Hitachi
007 027 049 051 083 085 098 100
Inkel 075
JC Penney
005 010 027 037 041 051 065 069
070
JVC
048 077 080 132
Kawasho 041
051
KMC 007
KTV
007 030 059 065
Kurazai 062
Lodgenet 062
Logik 062
Luxman
027 041 051
LXI
006 035 067
Magnavox(Philips) 001 005 007 014 026 027 041 052
068 081
Majestic 062
Marantz
003 065 076
Megatron 086
Memorex
010 031 062
MGA/Mitsubishi 003 027 031 041 044 051 065 076
084
Montgomery Ward 007 037 044 057 058 062 065 067
081
NEC
023 027 031 044 101
Orion
013 017 033 045 047 078
Panasonic
018 019 021 024 053 063
Philco
001 007 027 052 065 081
Philips(Magnavox) 001 005 007 014 026 027 041 052
068 081
Pilot
041 059 097
Pioneer 056
103
Portland 007
027
ProScan
055 061 073 082 112
Proton
031 126 128
Pulsar 041
Quasar 019
Radio Shack
041
Realistic
012 057 079
RCA
022 027 046 053 055 061 065 072
073 082
Sampo 031
044
Samsung
007 016 020 031 044 119 129
Sanyo
002 010 028 104 133
Scott
031 044 079
Motorola (General Instrument)
DCT, CFT 2200
001
CFT2100, CFT2000
002
Jerrold
003
DL4, DP(V), DQN(V), DPBB
Scientific Atlanta
Explorer
004
Explorer(#, *)
015
Explorer(Blue Ridge)
016
Explorer(WorldGate™)
018
8600X
005
8600
006
8540, 70, 90
007
