Contec AO-1604CI2-PCI, User Manual

Page: 67 / 85

5. About Software
60
AO-1604CI2-PCI
Usage of Utility Program
Program for Measurement of Function Execution Speed
The execution time of some main functions can be measured in a function execution speed measurement
program. To use a function execution speed measurement program, click the [execution time
measurement] button in the diagnostic program.
CAUTION
Even if this product is installed, the displayed board name is “DAI16-4C(PCI)".
There is no problem in operation even if the board name is displayed as “DAI16-4C(PCI)".
Procedure
(1) Chose the measure device from device list.
(2) Click the button written with the function name to measure the execution speed of the function.
Please choose from a list the number of channels used for conversion in function AioMultiAi and
AioMultiAo. Input the transmission data size in function AioGetAiSamplingData and
AioSetAoSamplingData. The transmission data is set by unit of kByte.
(3) End the application with an [end] button.
* The name of the board
you have just added is
displayed.
- DAI16-4C(PCI)