Contec AIO-120802LN-USB User Manual Download Page 24

Page: 24 / 105

2. Setup

AIO-121602LN-USB, AIO-120802LN-USB

Setting with the Found New Hardware Wizard

(1) The “Found New Hardware Wizard” will be started.

In Windows Vista, Because the driver's installation is completed by "Installing the Software", it is

not necessary to operate it about the Hardware Wizard.

(2) Select “Install from a list or specific location”, then click on the [Next] button.

Detect setup information from supplied CD automatically for installing USB driver.

Point

Please specify the path for supplied CD as follows in the case of failure in detecting automatically.

X:\INF\WDM\AIO (X: CD-ROM drive)

(3) Click on [Finish] button to complete the installation of USB driver.

* The name of the connected
    product will be displayed.
  - AIO-121602LN-USB
  - AIO-120802LN-USB

Summary of Contents for AIO-120802LN-USB










































































































Search results

Summary of Contents for AIO-120802LN-USB

Reviews:

Contec AIO-120802LN-USB, User Manual, Page: 24 / 105

Search results

Summary of Contents for AIO-120802LN-USB

Reviews: