Contec ADI12-16(PCI) Page 9 User Manual Download

Page: 9 / 95

1. Before Using the Product

ADI12-16(PCI)

For more details on the option, please refer to this chapter “Cable & Connector” or
“Accessories (Option)”.

Support Software

You should use CONTEC support software according to your purpose and development environment.

Windows version of analog I/O driver

API-AIO(WDM) / API-AIO(98/PC)

[Stored on the bundled CD-ROM driver library API-PAC(W32)]

The API-AIO(WDM) / API-AIO(98/PC) is the Windows version driver library software that provides products in the

form of Win32 API functions (DLL). Various sample programs such as Visual Basic and Visual C++, etc and

diagnostic program *1useful for checking operation is provided.

For more details on the supported OS, applicable language and new information, please visit the CONTEC’s Web site.

Linux version of analog I/O driver

API-AIO(LNX)

[Stored on the bundled CD-ROM driver library API-PAC(W32)]

The API-AIO(LNX) is the Linux version driver software which provides device drivers (modules) by shared library

and kernel version. Various sample programs of gcc are provided.

For more details on the supported OS, applicable language and new information, please visit the CONTEC’s Web site.

Data acquisition VI library for LabVIEW

VI-DAQ

(Available for downloading (free of charge) from the CONTEC web site.)

This is a VI library to use in National Instruments LabVIEW.

VI-DAQ is created with a function form similar to that of LabVIEW's Data Acquisition VI, allowing you to use

various devices without complicated settings.

For more details on the library and download of VI-DAQ, please visit the CONTEC’s Web site.

Summary of Contents for ADI12-16(PCI)
































































































Search results

Summary of Contents for ADI12-16(PCI)

Reviews:

Related manuals for ADI12-16(PCI)

Brands by name

Popular brands

Contec ADI12-16(PCI), User Manual

Search results

Summary of Contents for ADI12-16(PCI)

Reviews:

Related manuals for ADI12-16(PCI)

Brands by name

Popular brands