Contec ADI12-16(PCI) Page 82 User Manual Download

Page: 82 / 95

5. About Software

ADI12-16(PCI)

Uninstalling the Driver Libraries

To uninstall API-PAC(W32), follow the procedure below.

The method used to uninstall API-PAC(W32) differs depending on which OS you are using.
Follow the procedure given below.

Uninstall procedure for Windows 7 and Windows Vista

< Uninstalling the device driver >

1. Run Device Manager. From [My Computer] - [Control Panel], select [System] and then select the

[Device Manager] tab.

(You can also open Device Manager by right clicking on My Computer and selecting Properties.)

2. All of the hardware that uses the API-TOOL(WDM) driver is registered under the CONTEC

Devices tree.

Open the device tree, select the hardware to uninstall, and then right-click the hardware.
From the popup menu, select [Uninstall].

3. A dialog box opens asking you to confirm whether to uninstall. Select the [Delete the driver

software for this device] checkbox, and then click [OK].

* The name of the board

you have just added is

displayed.

- ADI12-16(PCI)

* The name of the board

you have just added is

displayed.

- ADI12-16(PCI)

Summary of Contents for ADI12-16(PCI)
































































































Search results

Summary of Contents for ADI12-16(PCI)

Reviews:

Related manuals for ADI12-16(PCI)

Brands by name

Popular brands

Contec ADI12-16(PCI), User Manual

Search results

Summary of Contents for ADI12-16(PCI)

Reviews:

Related manuals for ADI12-16(PCI)

Brands by name

Popular brands