Contec AD12-16 User Manual Download Page 42

Page: 42 / 87

3. External Connection

AD12-64(PCI), AD12-16(PCI)

External Connection

This chapter describes the interface connectors on the product and the external I/O circuits.
Check the information available here when connecting an external device.

How to connect the connectors

Connector shape

To connect an external device to this product, plug the cable from the device into the interface
connector (CN1) shown below.

* Please refer to chapter 1 for more information on the supported cable and accessories.

Figure 3.1. Interface Connector Shape

Figure 3.2. Examples of Connecting Options

CN1

B48

B47

A48

A47

A02

A01

B02

B01

- Connector used

PCR- equivalence to it

[mfd.by HONDA TSUSHIN KOGYO CO., LTD]

- Compatible connector

PCR-E96FA or equivalence to it

[mfd. by HONDA TSUSHIN KOGYO CO., LTD.]

Interface connector(CN1)

CN5-H96F (Set of 5 connectors)

[CONTEC, M(male)type]]

PCA96P-1.5

AD12-64(PCI)
AD12-16(PCI)

Option

Cable

PCB96PS-0.5P,

1.5P

PCA96PS-0.5P,

1.5P

PCB96P-1.5

Option

Cable

Relay terminal stan

Screw terminal unit

EPD-96A, EPD-96

Summary of Contents for AD12-16
























































































Search results

Summary of Contents for AD12-16

Reviews:

Contec AD12-16, User Manual, Page: 42 / 87

Search results

Summary of Contents for AD12-16

Reviews: