Disposal
en
57
14.2 Information on display panel
Fault
Cause and troubleshooting
A message with "D"
or "E" appears in the
display, e.g. D0111
or E0111.
Malfunction
1.
Switch off the fuse in the fuse box.
2.
Switch the fuse back on after approx. 10 seconds.
a
If the fault was a one-off, the message disappears.
3.
If the message appears again, call the after-sales service. Please specify the exact error
message when calling.
→
The message
ap-
pears in the display.
The automatic safety cut-out function has been activated.
▶
Press any button.
The message
ap-
pears in the display.
Moisture in the control panel.
▶
Allow the control panel to dry.
15 Disposal
Find out here how to dispose of old appliances cor-
rectly.
15.1 Disposing of old appliance
Valuable raw materials can be reused by recycling.
1.
Unplug the appliance from the mains.
2.
Cut through the power cord.
3.
Dispose of the appliance in an environmentally
friendly manner.
Information about current disposal methods are
available from your specialist dealer or local author-
ity.
This appliance is labelled in accord-
ance with European Directive
2012/19/EU concerning used elec-
trical and electronic appliances
(waste electrical and electronic equip-
ment - WEEE).
The guideline determines the frame-
work for the return and recycling of
used appliances as applicable
throughout the EU.
16 How it works
Here, you can find the ideal settings for various dishes
as well as the best accessories and cookware. We
have tailored these recommendations to your appli-
ance.
16.1 What is the best way to proceed?
In this section, you will find out the best way to proceed
step-by-step in order to be able to make optimum use
of the recommended settings. You will get information
on a number of dishes, with details and tips on how to
best manually use and set your appliance.
Tip:
Your appliance has programmed settings for a se-
lection of dishes. If you want to be guided by the appli-
ance, use the automatic programmes.
1.
Select a suitable dish from the overviews.
Tips
¡
If you are using the appliance for the first time,
follow this basic information:
–
–
–
¡
If you do not find the exact dish or application
that you want to prepare or implement, look for a
similar dish and take the general information into
consideration.
2.
Remove any accessories from the cooking compart-
ment.
3.
Select suitable cookware and accessories.
Use the cookware and accessories listed in the re-
commended settings.
4.
Only preheat the appliance if the recipe or the re-
commended settings tell you to do so.
5.
Set the appliance according to the recommended
settings.
6.
WARNING ‒ Risk of scalding!
Hot steam may escape when you open the appli-
ance door. Steam may not be visible, depending on
the temperature.
▶
Open the appliance door carefully.
▶
Keep children at a safe distance.
When the dish is ready, switch off the appliance.
