Grill
en
67
The fan may continue to run after operation has
been paused or stopped.
a
The appliance stops any ongoing functions.
10 Grill
You can brown or gratinate your food using the grill.
You can use the grill on its own or in combination with
the microwave.
10.1 Setting the grill
1.
Set the function selector to .
2.
Set a grill setting using the rotary selector.
a
The display shows the grill setting.
3.
Use the rotary selector to set the required cooking
time.
4.
Press to start.
a
The appliance starts heating. Once the appliance
has heated up, slight fluctuations in temperature are
normal.
a
The temperature display lights up completely.
Note:
When the time has elapsed, a signal sounds.
10.2 Setting the cooking time
1.
Set an operating mode.
2.
Press until
is highlighted.
3.
Use the rotary selector to set the required cooking
time.
4.
Press .
a
The appliance starts heating.
a
lights up.
a
You can see the cooking time counting down.
10.3 Changing the grill setting
Once the grill function has been selected or the opera-
tion has been started, you can still change the grill set-
ting at any time.
▶
Use the rotary selector to change the grill setting.
a
The cooking time remains unchanged.
10.4 Pausing the operation
1.
Press or open the appliance door.
a
The appliance stops the operation.
a
flashes.
2.
Close the appliance door.
3.
Press .
a
The appliance continues the operation.
a
lights up.
10.5 Stopping operation
You can stop operation at any time.
▶
Turn the function selector to the off position.
The fan may continue to run after operation has
been paused or stopped.
a
The appliance stops any ongoing functions.
11 Steam
You can use the steam function on its own or in com-
bination with the grill function and the microwave func-
tion. To ensure optimum use of the steam function, re-
move the wire rack. Insert the glass tray at shelf posi-
tion 3 and insert the steam container into the glass
tray.
Note:
You will hear a humming noise during operation.
This noise is caused by the pump. It is a normal oper-
ating noise.
11.1 Setting the steam
Note:
If you have not used the appliance for an exten-
ded period, start by running a rinse cycle .
WARNING ‒ Risk of scalding!
Hot steam may escape when you open the appliance
door. Steam may not be visible, depending on the tem-
perature.
▶
Open the appliance door carefully.
▶
Keep children at a safe distance.
WARNING ‒ Risk of burns!
The water tank may heat up while the appliance is in
operation.
▶
Wait until the water tank has cooled down from the
previous operation.
▶
Remove the water tank from the tank recess.
1.
Use the function selector to select .
a
The appliance is ready to use.
a
The maximum steam setting and a cooking time of
20 minutes are set as the default values.
a
The arrow next to flashes.
2.
Remove the water tank, fill with fresh water up to the
"MAX" mark and insert fully in the tank recess.
