CONSTRUCTA CA4 14 Series, Instructions For Installation And Use Manual

Page: 24 / 64

24
Absence of pan or unsuitable size
If no pan is placed on the selected hotplate, or if it is made of
unsuitable material or is not the correct size, the power level
displayed on the hotplate indicator will flash. Place a suitable
pan on the hotplate to stop the flashing. If this takes more than
90 seconds, the hotplate will switch off automatically.
Empty pans or those with a thin base
Do not heat empty pans, nor use pans with a thin base. The
hob is equipped with an internal safety system. However, an
empty pan may heat up so quickly that the "automatic switch
off" function may not have time to react and the pan may reach
very high temperatures. The base of the pan could melt and
damage the glass on the hob. In this case, do not touch the
pan and switch the hotplate off. If it fails to work after it has
cooled down, please contact the Technical Assistance Service.
Pan detection
Each hotplate has a minimum limit for detecting pans, which
varies depending on the material of the pan being used. You
should therefore use the hotplate that is most suitable for the
diameter of your pan.
Familiarise yourself with the appliance
These instructions for use are applicable to other hobs. On
page 2 an overview of the models is provided, along with
information on measurements.
The control panel
&RQWUROSDQHO
IRU PDLQVZLWFK
&RQWURO
SDQHOVIRU
VHOHFWLQJWKH
SRZHUOHYHO
&RQWUROSDQHOIRU
6 WLPHSURJUDPIXQFWLRQ
&RQWURO
SDQHOIRU
# FKLOGSURRI
ORFN
,QGLFDWRUVIRU
SRZHUOHYHO ³ É
IXQFWLRQDOLW\ ¯
UHVLGXDOKHDW ¤ ‡
SRZHUERRVWIXQFWLRQ °
&RQWUROSDQHOIRU
FOHDQLQJSURWHFWLRQ
IXQFWLRQ
&RQWURO
SDQHOIRU
PDLQ
VZLWFK
&RQWUROSDQHOV
IRU
VHOHFWLQJ
SRZHUOHYHO
&RQWUROSDQHO
IRU
6 WLPHSURJUDP
IXQFWLRQ
&RQWUROSDQHOIRU
# FKLOGSURRIORFN
,QGLFDWLRQVIRU
SRZHUOHYHO ³ É
IXQFWLRQDOLW\ ¯
UHVLGXDOKHDW ¤ ‡
SRZHUERRVWIXQFWLRQ °