CONSTRUCTA 4242004247241, User Manual

Page: 50 / 140

en
Troubleshooting
50
Troubleshooting
Troubleshooting
Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
ing information before contacting after-sales service. This will avoid unneces-
sary costs.
WARNING
Risk of electric shock!
Incorrect repairs are dangerous.
▶
Repairs to the appliance should only be carried out by trained specialist
staff.
▶
Only use genuine spare parts when repairing the appliance.
▶
If the power cord of this appliance is damaged, it must be replaced by the
manufacturer, the manufacturer's Customer Service or a similarly qualified
person in order to prevent any risk.
Malfunctions
Fault Cause troubleshooting
The appliance is not work-
ing.
No displays light up. The mains plug has not been
inserted properly.
▶
Check whether the mains plug for
the power cord is fully inserted into
the socket.
Fuse has been tripped.
▶
Check the fuses.
The power has failed.
1.
Check whether the power is on.
2.
Place ice packs (if available) on the
frozen food.
The LED lighting does not
work. The illuminant is defective.
1.
"Switch off the appliance."
→
Page 42
2.
Disconnect the appliance from the
mains.
Unplug the appliance from the
mains or switch off the circuit
breaker in the fuse box.
3.
Remove the illuminant cover to the
left.
→ Fig.
9
4.
Replace the illuminant.
Replacement illuminant: 220–240
V AC, E14 bulb holder, see the de-
fective illuminant's wattage.
The light switch is jammed.
▶
Check whether the light switch can
be moved.
→ Fig.
10