CONSTRUCTA 4242004247241, User Manual

Page: 48 / 140

en
Cleaning and servicing
48
Cleaning the appliance
Clean the appliance as specified to
ensure that it is not damaged by in-
correct cleaning or unsuitable clean-
ing products.
WARNING
Risk of electric shock!
¡
An ingress of moisture can cause
an electric shock.
▶
Do not use steam- or high-pres-
sure cleaners to clean the appli-
ance.
¡
Liquid in the lighting can be dan-
gerous.
▶
The rinsing water must not run
into the light.
ATTENTION!
¡
Unsuitable cleaning products may
damage the surfaces of the appli-
ance.
▶
Do not use hard scouring pads
or cleaning sponges.
▶
Do not use harsh or abrasive
detergents.
▶
Do not use cleaning products
with a high alcohol content.
¡
If you clean fittings and accessor-
ies in the dishwasher, this may
cause them to become deformed
or discolour.
▶
Never clean fittings and access-
ory in the dishwasher.
1.
"Prepare the appliance for clean-
ing." →
Page 47
2.
Clean the appliance, the fittings
and the door seals with a dish
cloth, lukewarm water and a little
pH-neutral washing-up liquid.
3.
Dry thoroughly with a soft, dry
cloth.
4.
Insert the fittings.
5.
Electrically connect the appliance.
6.
"Switch on the appliance."
→
Page 42
7.
Putting the food into the appliance.
Cleaning the condensation
channel and drainage hole
Regularly clean the condensation
channel and drainage hole to ensure
that the condensation can drain.
1.
Remove the pull-out container.
→
"Removing pull-out containers",
Page 49
2.
Carefully clean the condensation
channel and the drainage hole,
e.g. using a moistened cotton bud.
→ Fig.
3
Cleaning the ventilation grille
1.
Remove the ventilation grille for
cleaning.
‒
To do this, depress the clips in
the ventilation openings and
simultaneously remove the vent-
ilation grille forwards.
→ Fig.
4
2.
Clean the ventilation grille with
lukewarm soapy water and a dish
cloth.
3.
Let the ventilation grille dry com-
pletely and insert it.
Removing the fittings
If you want to clean the fittings thor-
oughly, remove these from your ap-
pliance.
Removing the shelf
▶
Lift the shelf, pull it out, lower it
and swing it out to the side.
→ Fig.
5
Removing door racks
▶
Lift the door rack upwards and re-
move it.
→ Fig.
6