MOUNTING INSTRUCTIONS
REPLACE CONTROL PANEL
Skjern 2020-09-02
IMPORTANT
Make sure to unplug the table before starting this operation
This manual is for two different versions of the 501-11, the old 6 core wire and
the new 4 core wire one
1.) Remove power cord
2.)
Make sure the table is unplugged!
230VAC!!
Cut the control panel wire 30cm from
table top edge
3.)Put the wire into the box and strip the ends of the wires and check if it
has 4 or 6 cores
ConSet A/S▪Industrivej 23▪6900 Skjern▪Denmark▪Phone +45-96800080▪[email protected]
Page 1
R144120
