1
KW9184M WEATHER STATION (RC-DCF)
USER MANUAL
1. Features
1.1
Time
- Radio Controlled Time
-
Perpetual Calendar Up to Year 2099
-
Day of week in 8 languages user selectable
- Daily Alarm Snooze Function
1.2
Humidity
- Indoor & Outdoor measurable range: 20 ~ 99%
- Outdoor Humidity Record from Start-Up/Reset, and the corresponded time
- 24 Hours Min/Max Display for Outdoor Humidity
1.3
Temperature
-
Indoor measurable range: -10~ 50°C
- Measures °C / °F user selectable
-
Outdoor measurable range: -20 ~ 50°C
- Outdoor Temperature Record from Start-Up/Reset, and the corresponded time
- 24 Hours Min/Max Display for Outdoor Temperature
- Comfort Indicator
1.4
Wireless Outdoor Sensor
-
Low-battery indicator for Outdoor Thermo Sensor
-
Wall Mount or Table Stand
-
One Wireless Thermo Sensor Included
-
433MHz RF transmitting frequency
-
100 meter transmission range in an open area
2
2. Main Unit Appearance
2.1 Part A- LCD
A1: Comfort Indicator
A2: Indoor Temperature
A3: Indoor Humidity
A4: Outdoor Temperature
A5: Outdoor Humidity
A6: Temperature Memory
A7: Humidity Memory
A8: Time
A9: Radio Controlled Icon
A10: Date
2.2 Part B- Buttons
B1: “
MODE
“button
B2: “
AL ON/OFF
” button
B3: “
MEM
” button
B4: “
SNOOZE/LIGHT
” button
B5: “
RESET
” button
B6: “
SEARCH
” button
B7: “
ALERT
” button
B8: “
ϰ
/C/F/
”
button
B9: “
ϧ
” button
2.3 Part C- Structure
C1: Battery Compartment
3
2XWGRRU7KHUPR6HQVRU
D1: Transmission Indication LED
D2: Outdoor Temperature display
D3: Outdoor Humidity display
D4: Battery Compartment
D5: Wall Mount Hole
D6: “RESET”
button
D7: “C/F” button
D8: Stand
4. Getting Started:
4.1 Main Unit:
l
Open main unit battery compartment cover [C1]
l
Insert 2 x A
A batteries observing polarity [ “+” and “ –“ marks]
l
Replace main unit battery compartment cover
l
Use a pin to press the RESET [B5] button on the rear of the main unit, the main
unit is now ready for use
4.2 Outdoor Thermo Sensor
l
Batteries compartment (D4) of thermo sensor is locating behind the back cover,
l
Insert 2 x AA
A batteries observing polarity [ “+” and “–“ marks]
5. Installation
5.1 Main Unit
The main unit can be placed onto any flat surface.
5.2 Outdoor Thermo sensor
The remote sensor should be securely mounted onto a horizontal surface.
Note:
Transmissions between receiver and transmitter can reach up to 100m in
open area. Open Area: there are no interfering obstacles such as buildings, trees,
vehicles, high voltage lines, etc.
6. Thermometer
4
6.1 RF Transmission Procedure:
l
The main unit automatically starts receiving transmission from outdoor thermo
sensor for outdoor temperature & humidity after batteries inserted.
l
The outdoor sensor will automatically transmit temperature and humidity signal
to the main unit after batteries inserted.
l
If main unit failed to receive transmission from outdoor thermo sensor in first 3
minutes after the batteries inserted
(“
- - .
–
”
display on the LCD),
hold “
SEARCH
”
button (B6) for 3 seconds to receive transmission manually.
RF icon “
”
flashes
on the LCD
6.2 Temperature & Humidity
(1) Past 24 Hours Maximum / Minimum Outdoor Temperature and Humidity
l
After start up, the unit automatically shows past 24 hours maximum outdoor
temperature and humidity record.
“
MAX
”
show on the LCD
l
After start up, the unit automatically shows past 24 hours minimum outdoor
temperature and humidity record.
“
MIN
” show
on the LCD.
(2) Recorded Maximum/Minimum Outdoor Temperature and Humidity from
Start-up/Reset.
l
Press
“
MEM
”
button (B3) to view the maximum and minimum temperature and
humidity record from start-up or reset.
“
”
flash on the LCD.
l
When viewing the memory record, hold
“
MEM
”
button for 3 seconds to clear
the maximum and minimum record.
l
When viewing the memory record, press
“
MEM
”
button (B3) again to check the
corresponded time and date for memory maximum and minimum temperature
& humidity record. The memory record value and corresponded time and date
flash. Press
“
MEM
”
button select to view:
Time & date for minimum temperature memory record, Time & date for
minimum humidity memory record, Time and date for maximum temperature
memory record, Time and date for maximum humidity memory record.
(3)
Celsius / Fahrenheit
l
P
ress “°C /°F” button (
B8) to select Indoor/Outdoor Temperature in Celsius mode
or Fahrenheit mode.
l
If the temperature is out of the measurable range, LL.L (beyond the minimum
temperature) or HH.H (beyond the maximum temperature) will be shown on the
LCD.
(4) Humidity
l
The humidity measurable range is 20% ~ 99%. If the current humidity
